Product Name: Engine management system (MPI)

Model Name: YESA-4240LT

Feature

• Educational demonstration stand is designed for gasoline injector engine management system (MPI) study 

• Purpose of the training stand - practical and laboratory training/testing

 




 

Specifition

• Mobile stand on four wheels

• Gasoline injector engine management system (MPI) with multipoint petrol injection installed in upper part of stand

• Stand allow to monitoring the following

 - Fuel supply system

 - Amount of injected fuel

 - Fuel pressure of the fuel pump

• Construction of the fuel pump and fuel distribution system allow visually see the distribution of the fuel flow

• The ignition system and spark plugs installed in a way that allows visual monitoring of their activities

• Air flow in the intake manifold are adjustable, allowing functional demonstration of air mass flow and air temperature sensors

• Adjustable crankshaft rotation speed

• Ability altering the air/fuel mixture by the O2 sensor signal simulator

• Included the principal electrical circuit diagram with elements of the (MPI) system with built-in electrical measurement connectors. Stand allows to simulate 15 system errors by disconnecting plugs from connectors

• Possibility of measuring system parameters in electrical circuits, connecting to measurement contacts

• Ability to measure any system component electric parameters by connecting to the electrical circuit

• Ensured the possibility of ignition system high voltage circuit measurements

• Engine management system have a built-in voltmeter

• The stand has a closed structure – internal wiring is not visible

• Ensured the possibility of running control unit diagnostics using EOBD 16 - pin diagnostic socket

• Ensured the ability of detected systemic error reading / deletion

• Ensured the possibility of system parameters control

• Ensure the possibility of the control unit coding / configuration

• Training bench equipped with a network power supply (220 /12V) and a battery (12V)

• Training stand include

- Exam / practical work simulation terminal, which should be able to simulate not less than 10 different system errors

- Automobile oscilloscope

- EOBD diagnostics equipment

• Training stand size: 1860x1450x700 mm

• Measure the waveforms and check the changes according to RPM speed

• Engine operation : check the operation of the injector and sparks in the order of switch plugs (1, 3, 4, 2) and inspect whether normal operation of each sensor

• Flame intensity measurement by adjusting the ignition gap




Remark

• Supplied by YES01, the company that has certification for ISO9001

• Seoul Metropolitan Government and Seoul Business Agency certify that YES01 is a company

• Made in Korea